Battery Management, Renewables & E-Mobility

Product portfolio, segment-specific certifications, and supplier ecosystem

‍

Indic manufactures PCBA, box-build, and harness-integrated assemblies across automotive Battery Management Systems, renewable-energy products, and EV/ e-mobility platforms— from cell-level battery electronics and traction inverters to solar inverters, energy meters, and DC fast-charging infrastructure.

‍

1. Battery Management Systems (BMS)

‍

Cell monitoring, balancing, protection, and HV power distribution — for EV powertrains and energy-storage systems.

‍

Battery Systems — EV applications

‍

Battery Management System (BMS) for 2W / 3W / 4W EVs (cell monitoring, balancing, protection)  · Battery Pack PCBA (module-internal control)  · Battery Disconnect Unit (BDU) for HV safety isolation · High-Voltage Battery Junction Box for HV power distribution & protection.

‍

Builds: PCBA + Box-Build + Harness    ·    Certifications: AEC-Q100/Q200,IATF 16949:2016, IPC-A-610 Class 3 where applicable

‍

Battery Systems — Energy-storage applications

‍

Combined Inverter/Chargers with integrated BMS (off-grid and backup power)  · DC-Input Charge Controllers  ·  DC-DC Converters and Chargers for energy-storage and power-conversion systems.

‍

Builds: PCBA + Box-Build    ·    Certifications: RoHS, CE, BIS-eligible

‍

IN PRACTICE

‍

On a BMS PCBA program for an automotive customer, Indic resolved a flash-memory failure that the IC supplier would not troubleshoot — through firmware-level intervention. PPM dropped from ~5,000 to ~0 on post-upgrade shipments.

‍

2. Renewables & Energy

‍

Metering, power conversion, motion control, and mechanical integration for solar, energy-storage, and grid programs.

‍

Metering, Monitoring & Connectivity

‍

Energy Meters  ·  Zigbee-enabled Smart Energy Meters (AMI)  ·  Zigbee Communication Modules  · Monitoring, Communication & Connectivity Modules  ·  Router boards for Oil & Natural Gas(ONG) remote stations.

Builds: PCBA + Box-Build    ·    Certifications: RoHS, BIS-eligible, Industrial-grade

‍

Power Conversion, Backup & Storage

‍

Solar /Grid-Tie Inverters (PV-to-grid, off-grid)  ·  UPS Systems(industrial, commercial, telecom)  ·  DC-DC Converters for Solar PV/ off-grid renewable power  ·  Charge Controllers and Inverter/Chargers.

Builds: PCBA + Box-Build    ·    Certifications: RoHS, CE

‍

Motion, Process Control & Mechanical

‍

Drive Controllers and Variable-Frequency Drives  ·  Industrial Controller Units  ·  Enclosures, Mounting Hardware, Control Panels and Cable Assemblies for renewables system integration.

Builds: PCBA + Box-Build / Mechanical    ·    Certifications: RoHS, CE

‍

IN PRACTICE

‍

Indic took over a high-mix solar-powered water-distribution program from a Taiwanese partner that could not absorb engineering change. Transfer discipline was rebuilt end-to-end — BOM, DFM/DFT, controlled documentation, product-fit test strategy. Result: ~45%production cost reduction, ~25% output gain, ~15% defect rate reduction within months.

‍

3. Electric Vehicle (EV) & E-Mobility

‍

Power train, charging, power distribution, and thermal-management electronics for 2W,3W, and 4W EVs and charging infrastructure.

‍

Powertrain & Traction Electronics

‍

EV Traction DC/AC Inverters (2W / 3W / 4W)  ·  EV DC/DC Converters for HV→LV powertrain step-down  ·  Motor Controller Units (MCU)  · Electric Traction Motors  ·  Sub-assembly and harness-integrated motor electronics.

Builds: PCBA + Box-Build + Sub-Assembly    ·    Certifications:AEC-Q100/Q200, IATF 16949:2016

‍

Charging— Vehicle & Infrastructure

‍

On-Board Charger (OBC) for EV onboard AC charging  ·  3 kW Three-Wheeler EV Charger  ·  DC Fast Chargers (passenger EV and commercial fleet)  · EV Charging Infrastructure / EVSE electronics  ·  EV Charging Control Units (IEC 62196-2 Type 1 / Type 2).

Builds: PCBA + Box-Build    ·    Certifications: AEC-Q, ARAI certified (3kW), IEC 61851, IEC 62196-2

‍

Power Distribution & Interconnect

‍

Power Distribution Unit (PDU) for HV power routing and protection  ·  HVAC and DC Connectors  · Converters and Connectors for EV power interconnect.

Builds: Box-Build + Harness, Sub-Assembly    ·    Certifications: AEC-Q100/Q200

‍

Thermal Management

‍

Electric Air Conditioning (eA/C) electronics for cabin thermal comfort  · Electric Heater (eHeater) electronics for cabin heating and battery pre-conditioning.

Builds: PCBA + Box-Build    ·    Certifications: AEC-Q

‍

IN PRACTICE

‍

For a 3 kW 3-wheeler EV charger program, Indic localized critical components against validated alternates and parallelized PFC top/bottom SMT with concurrent box-build— delivering a 4-day assembly cycle in time for the ARAI certification window (legacy build cycle had been ~2 weeks).

‍

4. Certifications & Compliance Regimes

‍

‍

5. Supplier Ecosystem & Supporting Capabilities

‍

‍

Schedule a discovery call at indicelectronics.com ·  or email info@indicelectronics.com with your design package, BOM, and target program window.

‍

‍